เซนเซอร์แรงดันน้ํามันเชื้อเพลิง Npt 5v 1 / 8 นิ้ว

1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air Gas

Specification:
Condition: Brand New!!
Model Number:?B90095
Product Name: Oil Fuel PressureTransducer
Material: Stainless Steel & Rubber
Color: Silver & Black
Voltage: DC 5V
Size: 53mm x 14mm
Cable Length: 312mm
Thread: 1/8-27 NPT / 1/8 NPT
Pressure: 5psi 15psi 30psi60psi 100psi150psi200psi
(Please let?us?know?the?pressure?you’d?likeYou?can?leave?the?message?on?your?Paypal?note to?tell?us.)
Quantity: 1pc

--30 psi
Input: 0-30 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V 15psi outputs 2.5V 30 psi outputs 4.5V.
Accuracy: within 2% of reading (full scale).
Thread: 1/8-27 NPT.
Wiring Connector: Water sealed quick disconnect. Mating connector is included.
Wiring: Red for +5V; Black for ground; Blue for signal output.

--100 psi
Input: 0-100 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V 50 psi outputs 2.5V 100 psi outputs 4.5V.
Accuracy: within 2% of reading (full scale).
Thread: 1/8-27 NPT
Wiring Connector: Water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for +5V; Black for ground; Blue for signal output.

--150 psi
Input: 0-150 psi
Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V 75 psi outputs 2.5V 150 psi outputs 4.5V
Accuracy: +/-0.5%FS
Thread: 1/8 NPT
Wiring: Red for +5V; Black for ground; Green for signal output

--200 psi
Input: 0-200 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V 100 psi outputs 2.5V and 200 psi outputs 4.5V
Working Temperature: -40~+125℃
Accuracy: ±1%FS
Thread: 1/8-27 NPT
Overload Capacity: 2 times of rated pressure
Pressure Medium: Oil gas and water which is compatible with 316L stainless steel
Load Resistance: ≤(supply power-6.5V/0.02A)Ω
Shock Resistance: 100g
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3
Wiring Connector: Water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for IN+; Black for GND; Green for OUT.

Fitment:
For oil fuel diesel gas air pressure（Cannot use measuring water pressure）
Can be used in oil tank gas tank diesel tank etc.

Features:
-Its an advance pressure transducer than traditional mechanical pressure transducer.
-±2%FS small output error including nonlinear hysteresis error and repeatability full temperature range.
-It has complete surge voltage protection function.
-Light weight and small size convenient to install and operate.

Package Includes:
1 x Pressure Transducer (With Cable)

Note:
1.We provide clear pictures measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.If you want to know how to use or install itplease contact us by Email.We will provide help as much as possible.